gallant/SDL2
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
SDL2/test/checkkeysthreads.c

297 lines
7.8 KiB
C
Raw Normal View History

Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
/*
Updated copyright for 2023
2023-01-09 11:41:41 -06:00
Copyright (C) 1997-2023 Sam Lantinga <slouken@libsdl.org>
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely.
*/
/* Simple program: Loop, watching keystrokes
Note that you need to call SDL_PollEvent() or SDL_WaitEvent() to
pump the event loop and catch keystrokes.
*/
#include <stdio.h>
#include <stdlib.h>
#ifdef __EMSCRIPTEN__
#include <emscripten/emscripten.h>
#endif
Switch header convention from `#include "SDL.h"` to `#include <SDL3/SDLh>` I ran this script in the include directory: ```sh sed -i '' -e 's,#include "\(SDL.*\)",#include <SDL3/\1>,' *.h ``` I ran this script in the src directory: ```sh for i in ../include/SDL3/SDL*.h do hdr=$(basename $i) if [ x"$(echo $hdr | egrep 'SDL_main|SDL_name|SDL_test|SDL_syswm|SDL_opengl|SDL_egl|SDL_vulkan')" != x ]; then find . -type f -exec sed -i '' -e 's,#include "\('$hdr'\)",#include <SDL3/\1>,' {} \; else find . -type f -exec sed -i '' -e '/#include "'$hdr'"/d' {} \; fi done ``` Fixes https://github.com/libsdl-org/SDL/issues/6575
2022-11-26 22:43:38 -06:00
#include <SDL3/SDL.h>
Add SDL_main.h includes to tests .. including cmake/test/*.c, whatever that does (this is needed now because SDL.h doesn't include SDL_main.h anymore)
2022-12-14 22:58:20 -06:00
#include <SDL3/SDL_main.h>
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
int done;
/* Call this instead of exit(), so we can clean up SDL: atexit() is evil. */
static void
quit(int rc)
{
SDL_Quit();
exit(rc);
}
static void
print_string(char **text, size_t *maxlen, const char *fmt, ...)
{
int len;
va_list ap;
va_start(ap, fmt);
len = SDL_vsnprintf(*text, *maxlen, fmt, ap);
if (len > 0) {
*text += len;
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
if (((size_t)len) < *maxlen) {
*maxlen -= (size_t)len;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
} else {
*maxlen = 0;
}
}
va_end(ap);
}
static void
print_modifiers(char **text, size_t *maxlen)
{
int mod;
print_string(text, maxlen, " modifiers:");
mod = SDL_GetModState();
if (!mod) {
print_string(text, maxlen, " (none)");
return;
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_LSHIFT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " LSHIFT");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_RSHIFT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " RSHIFT");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_LCTRL) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " LCTRL");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_RCTRL) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " RCTRL");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_LALT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " LALT");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_RALT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " RALT");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_LGUI) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " LGUI");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_RGUI) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " RGUI");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_NUM) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " NUM");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_CAPS) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " CAPS");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_MODE) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
print_string(text, maxlen, " MODE");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Prepend key modifier enum values with 'SDL_'
2022-12-23 19:52:46 -06:00
if (mod & SDL_KMOD_SCROLL) {
Added KMOD_SCROLL to track the scroll lock state Fixes https://github.com/libsdl-org/SDL/issues/4566
2021-08-10 19:50:17 -05:00
print_string(text, maxlen, " SCROLL");
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
}
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
}
static void
PrintModifierState()
{
char message[512];
char *spot;
size_t left;
spot = message;
left = sizeof(message);
print_modifiers(&spot, &left);
SDL_Log("Initial state:%s\n", message);
}
static void
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
PrintKey(SDL_Keysym *sym, SDL_bool pressed, SDL_bool repeat)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
{
char message[512];
char *spot;
size_t left;
spot = message;
left = sizeof(message);
/* Print the keycode, name and state */
if (sym->sym) {
print_string(&spot, &left,
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
"Key %s: scancode %d = %s, keycode 0x%08X = %s ",
pressed ? "pressed " : "released",
sym->scancode,
SDL_GetScancodeName(sym->scancode),
sym->sym, SDL_GetKeyName(sym->sym));
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
} else {
print_string(&spot, &left,
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
"Unknown Key (scancode %d = %s) %s ",
sym->scancode,
SDL_GetScancodeName(sym->scancode),
pressed ? "pressed " : "released");
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
}
print_modifiers(&spot, &left);
if (repeat) {
print_string(&spot, &left, " (repeat)");
}
SDL_Log("%s\n", message);
}
static void
tests: several -Wwrite-strings fixes.
2021-11-19 16:02:02 -06:00
PrintText(const char *eventtype, const char *text)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
{
tests: several -Wwrite-strings fixes.
2021-11-19 16:02:02 -06:00
const char *spot;
char expanded[1024];
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
expanded[0] = '\0';
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
for (spot = text; *spot; ++spot) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
size_t length = SDL_strlen(expanded);
Clang-Tidy fixes (#6725)
2022-12-01 15:07:03 -06:00
(void)SDL_snprintf(expanded + length, sizeof expanded - length, "\\x%.2x", (unsigned char)*spot);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
}
SDL_Log("%s Text (%s): \"%s%s\"\n", eventtype, expanded, *text == '"' ? "\\" : "", text);
}
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
void loop()
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
{
SDL_Event event;
/* Check for events */
/*SDL_WaitEvent(&event); emscripten does not like waiting*/
Clang-Tidy fixes (#6725)
2022-12-01 15:07:03 -06:00
(void)fprintf(stderr, "starting loop\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
// while (SDL_PollEvent(&event)) {
while (!done && SDL_WaitEvent(&event)) {
Clang-Tidy fixes (#6725)
2022-12-01 15:07:03 -06:00
SDL_Log("Got event type: %" SDL_PRIu32 "\n", event.type);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
switch (event.type) {
case SDL_KEYDOWN:
case SDL_KEYUP:
PrintKey(&event.key.keysym, (event.key.state == SDL_PRESSED) ? SDL_TRUE : SDL_FALSE, (event.key.repeat) ? SDL_TRUE : SDL_FALSE);
break;
case SDL_TEXTEDITING:
PrintText("EDIT", event.text.text);
break;
case SDL_TEXTINPUT:
PrintText("INPUT", event.text.text);
break;
case SDL_MOUSEBUTTONDOWN:
/* Left button quits the app, other buttons toggles text input */
Clang-Tidy fixes (#6725)
2022-12-01 15:07:03 -06:00
(void)fprintf(stderr, "mouse button down button: %d (LEFT=%d)\n", event.button.button, SDL_BUTTON_LEFT);
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
if (event.button.button == SDL_BUTTON_LEFT) {
done = 1;
} else {
SDL API renaming: *Is* functions Feedback from @icculus: "IsTablet" uses "is" as a form of "to be" ...like, the actual question is of its nature. The rest is just a superfluous word in the question and it flows as better English with if (RectEmpty) than if (IsRectEmpty) Fixes https://github.com/libsdl-org/SDL/issues/6932
2022-12-28 21:34:01 -06:00
if (SDL_TextInputActive()) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
SDL_Log("Stopping text input\n");
SDL_StopTextInput();
} else {
SDL_Log("Starting text input\n");
SDL_StartTextInput();
}
}
break;
case SDL_QUIT:
done = 1;
break;
default:
break;
}
Clang-Tidy fixes (#6725)
2022-12-01 15:07:03 -06:00
(void)fprintf(stderr, "waiting new event\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
}
Clang-Tidy fixes (#6725)
2022-12-01 15:07:03 -06:00
(void)fprintf(stderr, "exiting event loop\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
#ifdef __EMSCRIPTEN__
if (done) {
emscripten_cancel_main_loop();
}
#endif
}
/* Very simple thread - counts 0 to 9 delaying 50ms between increments */
test/checkkeysthreads: build fixes, and add to os2 makefile.
2021-06-04 16:05:56 -05:00
static int SDLCALL ping_thread(void *ptr)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
{
int cnt;
SDL_Event sdlevent;
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
SDL_memset(&sdlevent, 0, sizeof(SDL_Event));
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
for (cnt = 0; cnt < 10; ++cnt) {
Clang-Tidy fixes (#6725)
2022-12-01 15:07:03 -06:00
(void)fprintf(stderr, "sending event (%d/%d) from thread.\n", cnt + 1, 10);
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
sdlevent.type = SDL_KEYDOWN;
sdlevent.key.keysym.sym = SDLK_1;
SDL_PushEvent(&sdlevent);
SDL_Delay(1000 + rand() % 1000);
}
return cnt;
}
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
int main(int argc, char *argv[])
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
{
SDL_Window *window;
checkkeysthreads: Create a renderer for window display on Wayland Applies checkkeys patch from 105f1206 to checkkeysthreads.
2021-10-26 20:27:34 -05:00
SDL_Renderer *renderer;
test/checkkeysthreads: build fixes, and add to os2 makefile.
2021-06-04 16:05:56 -05:00
SDL_Thread *thread;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
/* Enable standard application logging */
SDL_LogSetPriority(SDL_LOG_CATEGORY_APPLICATION, SDL_LOG_PRIORITY_INFO);
/* Initialize SDL */
if (SDL_Init(SDL_INIT_VIDEO) < 0) {
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't initialize SDL: %s\n", SDL_GetError());
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
return 1;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
}
/* Set 640x480 video mode */
window = SDL_CreateWindow("CheckKeys Test",
SDL_WINDOWPOS_CENTERED, SDL_WINDOWPOS_CENTERED,
640, 480, 0);
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
if (window == NULL) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't create 640x480 window: %s\n",
Update for SDL3 coding style (#6717) I updated .clang-format and ran clang-format 14 over the src and test directories to standardize the code base. In general I let clang-format have it's way, and added markup to prevent formatting of code that would break or be completely unreadable if formatted. The script I ran for the src directory is added as build-scripts/clang-format-src.sh This fixes: #6592 #6593 #6594
2022-11-30 14:51:59 -06:00
SDL_GetError());
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
quit(2);
}
checkkeysthreads: Create a renderer for window display on Wayland Applies checkkeys patch from 105f1206 to checkkeysthreads.
2021-10-26 20:27:34 -05:00
/* On wayland, no window will actually show until something has
actually been displayed.
*/
render: Remove SDL_GetRenderDriverInfo and change SDL_CreateRenderer. Fixes #6625.
2022-12-13 22:26:49 -06:00
renderer = SDL_CreateRenderer(window, NULL, 0);
checkkeysthreads: Create a renderer for window display on Wayland Applies checkkeys patch from 105f1206 to checkkeysthreads.
2021-10-26 20:27:34 -05:00
SDL_RenderPresent(renderer);
Use Apple's nomenclature for macOS and iOS Fixes https://github.com/libsdl-org/SDL/issues/6621
2022-11-25 18:00:06 -06:00
#if __IOS__
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
/* Creating the context creates the view, which we need to show keyboard */
SDL_GL_CreateContext(window);
#endif
SDL_StartTextInput();
/* Print initial modifier state */
SDL_PumpEvents();
PrintModifierState();
/* Watch keystrokes */
done = 0;
Clang-Tidy fixes (#6725)
2022-12-01 15:07:03 -06:00
thread = SDL_CreateThread(ping_thread, "PingThread", NULL);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
#ifdef __EMSCRIPTEN__
emscripten_set_main_loop(loop, 0, 1);
#else
while (!done) {
loop();
}
#endif
SDL_WaitThread(thread, NULL);
SDL_Quit();
Cleanup add brace (#6545) * Add braces after if conditions * More add braces after if conditions * Add braces after while() conditions * Fix compilation because of macro being modified * Add braces to for loop * Add braces after if/goto * Move comments up * Remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements * More remove extra () in the 'return ...;' statements after merge * Fix inconsistent patterns are xxx == NULL vs !xxx * More "{}" for "if() break;" and "if() continue;" * More "{}" after if() short statement * More "{}" after "if () return;" statement * More fix inconsistent patterns are xxx == NULL vs !xxx * Revert some modificaion on SDL_RLEaccel.c * SDL_RLEaccel: no short statement * Cleanup 'if' where the bracket is in a new line * Cleanup 'while' where the bracket is in a new line * Cleanup 'for' where the bracket is in a new line * Cleanup 'else' where the bracket is in a new line
2022-11-27 10:38:43 -06:00
return 0;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 14:58:20 -06:00
}
Reference in a new issue Copy permalink